HP w2408h Vivid Color 24″ Widescreen Flat Panel Monitor by compusatv

Product Features

HP LCD Monitors

The HP LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) screen. This guide discusses the following models:

  • vp15 LCD Monitor
  • vp17 LCD Monitor
  • vp19 LCD Monitor
  • FP1707 LCD Monitor
  • WF1907 LCD Monitor
  • w1707 LCD Monitor
  • w1907 LCD Monitor
  • w2007 LCD Monitor
  • w2207 LCD Monitor
  • w2216 LCD Monitor
  • w2408 LCD Monitor

Features

  • Large diagonal viewable-area display
  • Optimum resolution:

❏  vp15: 1024 × 768 @ 60 Hz

❏  vp17, vp19, and FP1707: 1280 × 1024 @ 60 Hz

❏  WF1907, w1707, and w1907: 1440 × 900 @ 60 Hz

❏  w2007, w2216, and w2207: 1680 x 1050 @ 60 Hz

❏  w2408: 1920 x 1200 @ 60 Hz

Plus full-screen support for lower resolutions

  • Video inputs supported: ❏ VGA analog signal

❏  DVI digital signal (select models only)

❏  High-definition multimedia interface (HDMI) (select models only)

  • Fast response time, providing better experience for gaming and graphics
  • Easy viewing from a sitting or standing position, or while moving from one side of the monitor to the other
  • Tilt adjustment
  • Height adjustment (select models only)
  • Pivot adjustment, for landscape or portrait viewing (select models only)
  • Removable pedestal and Video Electronics Standards Association (VESA) standard mounting holes for flexible mounting solutions, including wall-mounting
  • Security lock slot for a Kensington lock security cable (security cable sold separately)
  • Plug and Play capability, if supported by your computer system

User’s Guide 1–1

Product Features

  • On-screen display (OSD) adjustments for ease of setup and screen optimization (choose English, Simplified Chinese, French, German, Italian, Spanish, Dutch, or Japanese)
  • Swiveling monitor, allowing a usable range of motion (select models only)
  • Built-in stereo speakers, front- or rear-facing depending on model
  • Universal Serial Bus (USB) 2.0 ports to use with USB devices (select models only have two or four ports)
  • Ambient light sensor (select models only)
  • Keyboard parking (select models only)
  • Power Saver to reduce energy consumption
  • Quick View settings display
  • CD includes (select models only): ❏ Drivers (select models only) ❏ Auto-adjustment software

❏ My Display software (select models only) ❏ Documents

❏  Adobe® Acrobat® Reader

  • Varied monitor base designs

Base Designs

HP W2408h User Manual 1

Cantilever base Column base Double-hinged base

1–2 User’s Guide

2

Safety and Maintenance Guidelines

Important Safety Information

The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor.

  • WARNING: Always connect your monitor, the computer, and other equipment to a grounded (earthed) power outlet. To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding feature. The grounding plug is an important safety feature.
  • WARNING: For your safety, be sure that the grounded power outlet you plug the power cord into is easily accessible to the operator and located as close to the equipment as possible. To disconnect power from the equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord.
  • CAUTION: To protect your monitor, as well as your computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, or scanner) to a surge protection device such as a power strip with surge protection or uninterruptible power supply (UPS).

Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a damage replacement policy, so you can replace your equipment if surge protection fails.

Safety Precautions

  • Use only a power source and connection compatible with this monitor, as indicated on the label/back plate of the monitor.
  • Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the power cord does not exceed the rating of the power cord. Look on the power label to determine the ampere rating (Amps or A) for each device.
  • Install your monitor near a power outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
  • Do not allow anything to rest on the power cord. Do not walk on the cord.

User’s Guide 2–1

Safety and Maintenance Guidelines

Maintenance Guidelines

To enhance the performance and extend the life of your monitor:

  • Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating properly or has been dropped or damaged, contact your Hewlett-Packard authorized dealer, reseller, or service provider.
  • Adjust only those controls that are described in the operating instructions.
  • Turn your monitor off when not in use. You can substantially increase the life expectancy of the monitor by using a screen saver program and turning off the monitor when not in use.
  • Keep your monitor in a well-ventilated area, away from excessive light, heat, or moisture.
  • Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.
  • Unplug the monitor from the power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
  • Do not drop the monitor or place it on an unstable surface.
  • When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken.

Cleaning the Monitor

The monitor is a high-quality optical device that requires special care when cleaning. To clean the monitor, follow these steps:

  1. Turn off the computer and the monitor.
  1. Unplug your monitor from the power outlet before cleaning.
  • CAUTION: Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor screen or cabinet. These chemicals may damage the monitor. Do not use liquid or aerosol cleaners. Never use water to clean an LCD screen.
  1. Wipe the screen with a dry, soft, clean cloth.
Check Also:  HP 2009m

If the screen requires additional cleaning, use an antistatic screen cleaner.

  1. Dust the monitor housing. Use a damp cloth to clean the cabinet.

If the cabinet requires additional cleaning, use a clean cloth dampened with isopropyl alcohol.

  1. Plug in the monitor.
  1. Turn on the monitor and the computer.

2–2 User’s Guide

3

Setting Up the Monitor

Unpacking the Monitor

  1. Unpack the monitor. Make sure all contents are included. Store the packing box.
  1. Turn off the computer and other attached devices.
  1. Determine whether the monitor will be desktop mounted or wall-mounted. See “Installing the Monitor.”
  1. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor screen-down while preparing it for installation.
  1. You need a Phillips screwdriver for preparing the monitor for wall-mounting. You may need a straight-slot screwdriver to secure some cables.

Installing the Monitor

You can install the monitor on a desktop or wall-mount it. Place the monitor in a convenient, well-ventilated location near your computer.

If the monitor will be installed on a:

Installing on a Desktop

Follow the instructions for your monitor type.

User’s Guide 3–1

Setting Up the Monitor

Unfolding the double-hinged monitor

  • WARNING: Do not place the double-hinged monitor face down for folding. The base hinge can spring up and cause serious injury or damage.
  1. With the monitor still in its flat, folded state, set it screen-side up on a flat surface.
  1. Rotate the screen to the horizontal position (in the figure, the straight arrow is your position in front of the monitor).

HP W2408h User Manual 3

  1. Holding the base of the monitor, lift up the panel at its top without touching or putting pressure on the screen (3).

HP W2408h User Manual 5

  1. Remove the shipping strap (do not cut it) (4).
  1. Put the shipping strap in a safe place, in case you need it to ship the monitor.
  1. Lift and lower the base hinge for proper viewing.

3–2 User’s Guide

Setting Up the Monitor

Assembling the cantilever base

  • CAUTION:damage. The screen is fragile. Avoid touching or applying pressure to the LCD screen; doing so can cause
  1. Set the monitor screen down on a flat, soft, protected surface.
  1. Align the neck with the monitor base.
  1. Slide the base until it snaps in place. Make sure the base is securely locked in place.

HP W2408h User Manual 7

Attaching the cantilever base

  1. Lift the monitor to an upright position and place on a flat, stable surface.

Assembling the column base

  1. Set the monitor base on a flat, stable surface.
  1. Lift the monitor, and align the pedestal with the base.
  1. Lower the monitor until the base snaps in place. Make sure the base is securely locked.

HP W2408h User Manual 9

Attaching the column base

User’s Guide 3–3

Setting Up the Monitor

Wall-Mounting the Monitor (Mounting Fixture not Supplied)

Before you mount the monitor on a wall, a swing arm, or other mounting fixture, you must remove the monitor base and the pedestal. You will need a Phillips screwdriver. Read the following warning and caution statements before beginning the procedure.

  • WARNING: To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting fixture is adequately installed and secured before attaching the monitor. Refer to the instructions supplied with the wall-mounting fixture and check that it is capable of supporting the monitor.

Preparing the double-hinged monitor for wall-mounting

  • WARNING: Do not place the double-hinged monitor face down for folding. The base hinge can spring up and cause serious injury or damage.
  1. Disconnect the power cable and any other cables from the monitor.
  1. Carefully place the monitor face down on a flat, soft surface. This might entail elongating the hinge and tilting the monitor back to ensure the monitor is flat.
  1. With your fingertips, snap off the VESA cover from the back of the monitor.
  1. Remove all four screws from the VESA plate.
  1. Save the removed items (cover, screws, and base) for future use.
  1. Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.

The four-threaded mounting holes that are on the back of the panel are compliant with the VESA standard for mounting flat-panel monitors. The15-inch monitor uses the 75 mm spacing standard, while the other models use the 100 mm spacing standard.

Use the four holes to attach a swing arm or other mounting fixture.
HP W2408h User Manual 11

3–4 User’s Guide

Setting Up the Monitor

Preparing the cantilever-base monitor for wall-mounting

  1. Disconnect the power cable and any other cables from the monitor.
  1. Remove the monitor base. Refer to “Removing the Monitor Base.” Keep the monitor panel screen down on a flat, soft area.
  1. After the base is removed, remove the rubber plug on the neck of the monitor. You will see a screw below the rubber plug and two additional screws on the panel.
  1. Remove all three screws.
  1. Remove the neck from the monitor.
  1. Save the removed items (rubber plug, screws, neck, and base) for future use.
  1. Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.

The four-threaded mounting holes that are on the back of the panel are compliant with the VESA standard for mounting flat-panel monitors. The vp15 monitor uses the 75 mm spacing standard, while the other models use the 100 mm spacing standard.

Use the four holes to attach a swing arm or other mounting fixture.
HP W2408h User Manual 13

User’s Guide 3–5

Setting Up the Monitor

Preparing the column-base monitor for wall-mounting

  1. Disconnect the power cable and any other cables from the monitor.
  1. With the monitor screen face-down on a flat, soft surface, remove the monitor base. Refer to “Removing the Monitor Base.”
  1. Remove the hinge cover and set it aside. Three screws and the hinge are exposed.
  1. Holding the pedestal so that it cannot fall, remove the single screw that is close to the hinge, and then remove the other two screws. If necessary, move the pedestal, so that all three screws are accessible.
  1. Slide the pedestal off the monitor panel.
  1. Save the removed items (screws, hinge cover, pedestal, and base) for future use.
  1. Follow the instructions that are included with the mounting fixture to ensure that the monitor is safely attached.

The four-threaded mounting holes that are on the back of the panel are compliant with the VESA standard for mounting flat-panel monitors. The vp15 monitor uses the 75 mm spacing standard, while the other models use the 100 mm spacing standard.

Use the four holes to attach a swing arm or other mounting fixture.
HP W2408h User Manual 15

Reinstalling the desktop pedestal and base for the monitor

  1. Remove the mounting fixture.
  1. Reverse the preceding instructions.

3–6 User’s Guide

Setting Up the Monitor

Connecting the VGA (Analog) or DVI-D (Digital) Cable

Use a VGA video cable or a DVI-D video cable (provided with select models). To use DVI, you must have a DVI-compliant graphic card. Connectors are located on the back of the monitor. Be sure the computer and monitor are turned off and unplugged.

Check Also:  HP zr2740w

Some graphic cards have both a DVI connector and a DVI-to-VGA converter included in the box (select models only). If the monitor has a VGA connector but no DVI connector, use the DVI-to-VGA converter to connect to the computer: Connect the DVI-to-VGA converter to the DVI connector on the computer graphic card, and then connect the VGA cable to the converter and the monitor.
HP W2408h User Manual 17

Connecting the VGA or DVI-D cable—connector locations may vary

To connect the VGA cable

Connect one end of the VGA video cable to the back of the monitor and the other end to the VGA video connector on the computer.

To connect the DVI-D cable

Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI video connector on the computer. You can use this cable only if your compute has a DVI-compliant graphic card installed. The monitor DVI-D connector and cable are included with select models only.

NOTE: If you use a DVI-to-HDMI adapter, you must connect the green audio cable to enable the speakers. The signal from the DVI connector is for video only.

Connecting the HDMI Cable

Connect one end of the HDMI cable (select models only) to the back of the monitor and the other end to any compatible digital audio/video source, such as a set-top box, a DVD player, or a digital television.
HP W2408h User Manual 19

User’s Guide 3–7

Setting Up the Monitor

Audio and Video Cables and Adapters

The following table shows the cable and adapter types that may be required to connect the monitor to the computer, TV, or set-top box.

The number and type of cables required may vary by model. Some cables and adapters are included for select models only and may be sold separately.
HP W2408h User Manual 21HP W2408h User Manual 23

HP W2408h User Manual 25HP W2408h User Manual 27

VGA cable VGA transmits an analog video signal.
HP W2408h User Manual 29

HP W2408h User Manual 31

NOTE: When using a VGA or DVI signal, you must connect your audio separately because a VGA or DVI signal converts only video data, not audio data. A separate audio connection is not necessary when you use an HDMI signal, because an HDMI signal can convert both video and audio data.

3–8 User’s Guide

Setting Up the Monitor

Connecting the Audio Cable

Connect the built-in monitor speakers to the computer by using the audio cable, as shown in the following illustration.
HP W2408h User Manual 33

Connecting the audio cables—connector locations may vary

Connecting the USB Hub Cable

Connect the USB hub cable from the computer to the USB In connector on the monitor (select models only have USB capability). This enables USB 2.0 ports on the monitor.
HP W2408h User Manual 35

USB In

Connecting USB Devices to the Monitor

You can connect two or four USB devices (select models only), such as a USB flash drive or a digital camcorder, to your monitor. Do this only after you have connected the USB hub cable from the computer to the monitor.
HP W2408h User Manual 37

User’s Guide 3–9

Setting Up the Monitor

Connecting the Power Cable

  1. Read the warning below.
  • WARNING: To reduce the risk of electric shock or damage to your equipment:
  • Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet.
  • Be sure that the grounded power outlet you plug the power cord is easily accessible to the operator and located as close to the equipment as possible. A power cord should be routed so that it is not likely to be walked on or pinched by items that are placed upon it or against it.
  • Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable.

See “Power Cord Set Requirements” in Appendix B for additional information.
HP W2408h User Manual 39

Connecting the power cable

  1. Connect one end of the power cable to the monitor and the other end to a grounded electrical outlet.

3–10 User’s Guide

Setting Up the Monitor

Cable Management

The HP LCD monitors have either two hooks or two cable tunnels on either side for cable management. Cables can be easily secured and are hidden when viewed from the front.

NOTE: If your monitor has the pivot feature, make sure the cords are set loosely enough so they will not pull and disconnect when the monitor is pivoted.

.
HP W2408h User Manual 41

User’s Guide 3–11

Setting Up the Monitor

Adjusting the Tilt

For optimal viewing, adjust the screen tilt to your own preference, as follows:

  1. Face the front of the monitor and hold the base so that you do not topple the monitor while changing the tilt.
  1. Adjust the tilt by moving the top edge of the monitor either toward or away from you, without touching the screen.

HP W2408h User Manual 43

  • CAUTION:toofar. The double-hinged monitor can fall back if the hinge is extended fully and the monitor screen is tilted back

HP W2408h User Manual 45

3–12 User’s Guide

Setting Up the Monitor

Adjusting the Swivel (Select Models Only)

The HP LCD monitor allows a usable range of motion with the swivel feature.
HP W2408h User Manual 47

  • CAUTION: To avoid breakage or other damage, avoid applying pressure to the LCD screen while swiveling it or changing the tilt.

Adjusting the Height (Select Models Only)

The double-hinged monitor adjusts up and down easily by extending or lowering the hinge.
HP W2408h User Manual 49

User’s Guide 3–13

Setting Up the Monitor

Pivoting the Monitor (Select Models Only)

NOTE: For full functionality of this pivot feature, the My Display software may need to be installed. See “My Display Software” in the Operating the Monitor chapter for information on how to install this software. Some graphics cards support rotating the image of the display automatically.

  1. Facing the monitor and holding its base down, tilt the monitor backward 10 to 30 degrees by pulling the bottom of the screen toward you.

HP W2408h User Manual 51

  • CAUTION: The first step is important—the double-hinged monitor can scratch the base surface if the monitor is not tilted back enough before pivoting it.

HP W2408h User Manual 53

  1. If the monitor is in its landscape position, after it is tilted back, pivot it clockwise to portrait position. If it is in portrait position, tilt it back and pivot the monitor counterclockwise to landscape orientation.

HP W2408h User Manual 55

3–14 User’s Guide

Setting Up the Monitor

Ambient Light Sensor (Select Models Only)

An integrated light sensor, on the left front of the monitor, adjusts the LCD backlight output to the current ambient light conditions. By default, the ambient light sensor is on. You manually enable or disable the sensor using the Image Control main menu in the OSD. If you adjust the Quick View, Brightness, Contrast, or sRGB functions in the OSD, the light sensor will automatically be disabled.
HP W2408h User Manual 57

Keyboard Parking

If you need more space on your desktop, place the keyboard under the monitor (select models only) when not in use.
HP W2408h User Manual 59

User’s Guide 3–15

Setting Up the Monitor

3–16 User’s Guide

4

Operating the Monitor

CD Software and Utilities

The CD that is included with this monitor contains the drivers and software that you can install on your computer.

Check Also:  HP 25es

Installing Drivers

If you determine that you need to update the drivers, you can install the monitor-driver INF and ICM files from the CD (select models only), or download them from the Internet.

To install the monitor-driver software from the CD:

  1. Insert the CD in your computer CD drive. The CD menu appears.
  1. Select the language.
  1. Click Install Monitor Driver Software.
  1. Follow the onscreen instructions.
  1. Restart the computer.
  1. Ensure that the proper resolutions and refresh rates appear in the Display Control Panel settings. Refer to the Windows® operating system documentation for more information.

NOTE: You might need to install the digitally signed monitor drivers (INF or ICM files) manually from the CD, in case of an installation error. Refer to the “Driver Software Readme” file on the CD for instructions (in English only).

Downloading Updated Drivers from the Internet

To download the latest version of drivers and software files from the HP Support site:

  1. Refer to: http://www.hp.com/support
  1. Select your country/region.
  1. Select Download Drivers and Software.
  1. Enter the model number of your monitor. The software-download pages for your monitor are displayed.
  1. Download and install the driver and software files by using the instructions in the download pages.
  1. Ensure that your system meets the requirements.

Using the Auto-Adjustment Function

You can easily optimize the screen performance for the VGA input by using the Auto/Select button on the monitor and the auto-adjustment pattern software on the CD provided.

Do not use this procedure if your monitor is using a DVI or HDMI input (select models only). If your monitor is using the VGA input, this procedure can correct the following image-quality conditions:

  • Fuzzy or unclear focus
  • Ghosting, streaking, or shadowing effects
  • Faint vertical bars
  • Thin, horizontal scrolling lines
  • Off-center picture

User’s Guide 4–1

Operating the Monitor

  • CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time. *To avoid burn-in image damage on your monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens.
  • A prolonged period of time is 12 consecutive hours of non-use. To use the auto-adjustment feature:
  1. Allow the monitor to warm up for 20 minutes before adjusting.
  1. Press the Auto/Select button on the monitor front panel.

❏ You can also press the Menu button, and then select Image Control, followed by Auto Adjustment from the OSD menu. See “Adjusting Screen Quality” in this chapter.

❏  If the result is not satisfactory, continue with the procedure.

  1. Insert the CD in your computer CD drive. The CD menu displays.
  1. Select the language.
  1. Select Open Auto-Adjustment Software.
  1. The setup test pattern displays.

HP W2408h User Manual 61

Auto-adjustment setup test pattern

  1. Press the Auto/Select button on the monitor front panel to produce a stable, centered image.

My Display Software

Use My Display (available for select models only) to choose preferences for optimum viewing. You can select settings for gaming, movies, photo editing or just working on documents and spreadsheets. My Display also provides an easy way to adjust settings such as brightness, color, and contrast.

To install the software:

  1. Insert the CD in your computer CD drive. The CD menu displays.
  1. Select the language.
  1. Click Install My Display Software (available on select models only).
  1. Follow the onscreen instructions.
  1. Restart the computer.

To open the My Display software:

  1. Click the HP My Display icon on the taskbar. HP W2408h User Manual 63

Or

  1. Click the Windows Vista start buttonHP W2408h User Manual 65 on the taskbar.
  1. Click All Programs.
  1. Click HP My Display.
  1. Select HP My Display.

HP W2408h User Manual 67

For additional information, refer to the onscreen Help within the software.

4–2 User’s Guide

Operating the Monitor

Front-Panel Controls

Control buttons are located on the front or top of the monitor:
HP W2408h User Manual 69

Icon Description

Power Turns the monitor on and to standby or sleep mode.
HP W2408h User Manual 71

NOTE: The power button is located on the top or front of the monitor depending on the model.

Menu Opens, selects, or exits the OSD menu.
HP W2408h User Manual 73

Adjusts the volume level.

Opens the Quick View menu to quickly adjust settings for gaming, video, photo, and text.
HP W2408h User Manual 75

Navigates backward through the OSD menu and decreases adjustment levels.

  • Navigates forward through the OSD menu and increases adjustment levels.

Auto Auto-adjusts the display to the ideal setting.

Select Enters the selected option.

Using the Onscreen Display (OSD)

An onscreen display is an image superimposed on a screen picture, commonly used by monitors, televisions, VCRs, and DVD players to display information such as volume, channel, and time.

NOTE:settings. You can use My Display OSD software (select models only) or the front-panel control buttons to adjust

  1. If the monitor is not already on, press the Power button to turn on the monitor.
  1. To access the OSD menu, press the Menu button. The OSD Main Menu displays.
  1. To navigate through the Main or Sub-Menu menu, press the + (Plus) button on the monitor’s front panel to scroll up, or the (Minus) button to scroll in reverse. Then press the Auto/Select button to select the highlighted function.

The menu moves to the top if you scroll down at the bottom of the selections. The menu moves to the bottom if you scroll up at the top of the selections.

  1. To adjust the scale of a selected item, press the + or button.
  1. Select Save and Return.

If you don’t want to save the setting, select Cancel from the Sub-Menu or Exit from the Main Menu.

  1. Press the Menu button to exit the OSD.

NOTE: When a menu is displayed, if the buttons are untouched for 30 seconds (factory default), adjustments and settings are saved and the menu closes.

User’s Guide 4–3

Operating the Monitor

OSD Menu Selections

The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to:

  • Cancel — to return to the previous menu level.
  • Save and Return — to save all changes and return to the OSD Main Menu screen. This Save and Return option is active only if you change a menu item.
  • Reset — to change back to the previous setting.
Main Menu
IconOptionsSubmenu OptionsDescription
Switch Video InputSwitches the video input signal source when the monitor is
(select models only)connected to two active and valid video sources. Switching
video input sources may take several seconds.
BrightnessAdjusts the brightness level of the screen.
ContrastAdjusts the contrast level of the screen.
Image ControlAdjusts the screen image. Also enables or disables the ambient
light sensor (select models only).
Auto-AdjustmentAutomatically adjusts the screen image (VGA Input only).
Horizontal PositionAdjusts the horizontal position of the picture (VGA Input only).
Vertical PositionAdjusts the vertical position of the picture (VGA Input only).

HP W2408h User Manual 77HP W2408h User Manual 79HP W2408h User Manual 81HP W2408h User Manual 83HP W2408h User Manual 85HP W2408h User Manual 87HP W2408h User Manual 89

Custom Scaling
HP W2408h User Manual 91

(select models only)

Selects the method on how displayed information on the monitor will be formatted. Select:

Fill to Screen — Image fills the entire screen and might look distorted or elongated because of non-proportional scaling of height and width.

Fill to Aspect Ratio — Image is sized to fit the screen and maintains proportional image.

Sharpness
HP W2408h User Manual 93

(select models only)

On a scale of 1 to 5, adjusts the screen image to look sharper or softer.

NOTE: If the one-to-one custom scaling menu is selected, scaling is disabled and the Sharpness feature is as well.

Ambient Light SensorAdjusts the brightness of the screen depending on the ambient
(select models only)light of the environment. The sensor is on the left front of the
monitor.
By default the sensor is set to On. If you adjust the Quick View,
Brightness, Contrast, or sRGB functions in the OSD, the
ambient light sensor will automatically be disabled.
ClockMinimizes any vertical bars or strips visible on the screen
background. Adjusting the Clock will also change the
horizontal screen image (VGA Input only).
Clock PhaseAdjusts the focus of the display. This adjustment allows you to
remove any horizontal noise, and clear or sharpen the image
of characters (VGA Input only).

HP W2408h User Manual 95HP W2408h User Manual 97HP W2408h User Manual 99

4–4 User’s Guide

To read more please download the PDFs below

Download HP W2408h Manual

hp w2408h specs

Related Posts

Leave a Reply

Your email address will not be published.