HP LaserJet Pro 200 Color MFP M276nw

Optimize copy quality

The following copy-quality settings are available:

• Auto Select: Use this setting when you are not concerned about the quality of the copy. This is the default setting.

• Mixed: Use this setting for documents that contain a mixture of text and graphics.

• Text: Use this setting for documents that contain mostly text.

• Picture: Use this setting for documents that contain mostly graphics.

2. Load the document onto the scanner glass or into the document feeder.

2. From the Home screen, touch the Copy button.

3. Touch the Settings button, and then scroll to and touch the Optimize button. Touch the arrow buttons to scroll through the options, and then touch an option to select it.

4. Touch the Black or Color button to start copying.

2 Quick Reference Guide ENWW

Scan by using the HP Scan software (Windows)

1. Double-click the HP Scan icon on the computer desktop.

2. Select a scanning shortcut, and adjust the settings if necessary.

3. Click Scan.

NOTE: Click Advanced Settings to gain access to more options.

Click Create New Shortcut to create a customized set of settings and save it in the list of shortcuts.

ENWW Scan by using the HP Scan software (Windows) 3

Replace the toner cartridges

1. Open the front door.

2. Pull out the toner cartridge drawer.

3. Grasp the handle on the toner cartridge, and then pull the toner cartridge straight up to remove it.

4 Quick Reference Guide ENWW

4. Remove the new toner cartridge from the packaging.

5. Gently rock the toner cartridge from front to back to distribute the toner evenly inside the cartridge.

6. Remove the plastic shield from the bottom of the new toner cartridge.

ENWW Replace the toner cartridges 5

7. Do not touch the imaging drum on the bottom of the toner cartridge. Fingerprints on the imaging drum can cause print-quality problems.

8. Insert the new toner cartridge into the product.

9. Pull the tab on the left side of the toner cartridge straight up to completely remove the sealing tape. Discard the sealing tape.

6 Quick Reference Guide ENWW

10. Close the toner cartridge drawer.

11. Close the front door.

12. Place the old toner cartridge and the plastic shield in the box for the new toner cartridge. Follow the recycling instructions that are included in the box.

ENWW Replace the toner cartridges 7

Check the scanner glass for dirt and smudges

Over time, specks of debris might collect on the scanner glass and white plastic backing, which can affect performance. Use the following procedure to clean the scanner glass and white plastic backing.

1. Use the power switch to turn off the product, and then unplug the power cord from the

electrical socket.

2. Open the scanner lid.

3. Clean the scanner glass and the white plastic backing with a soft cloth or sponge

that has been moistened with nonabrasive

glass cleaner.

CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the product; these can damage the product. Do not place liquids directly on the glass or platen. They might seep and damage the product.

4. Dry the glass and white plastic with a chamois or a cellulose sponge to prevent spotting.

5. Plug in the product, and then use the power switch to turn on the product.

8 Quick Reference Guide ENWW

Change color options (Windows)

1. From the software program, select the Print option.

2. Select the product, and then click the Properties or Preferences button.

3. Click the Color tab.

4. Click the Automatic or Manual setting.

• Automatic setting: Select this setting

for most color print jobs.

• Manual setting: Select this setting to adjust the color settings independent from other settings.

NOTE: Changing color settings manually can impact output. HP recommends that only color graphics experts change these settings.

5. Click the Print in Grayscale option to print a color document in black and shades of gray. Use this option to print color documents for photocopying or faxing. You can also use this option to print draft copies or to save color toner.

6. Click the OK button.

ENWW Change color options (Windows) 9

Print a cleaning page

1. From the Home screen, touch the Setup button.

2. Touch the Service menu.

3. Touch the Cleaning Page button.

4. Load plain letter or A4 paper when you are prompted.

5. Touch the OK button to begin the cleaning process.

The product prints the first side and then prompts you to remove the page from the output bin and reload it in Tray 1, keeping the same orientation. Wait until the process is complete. Discard the page that prints.

10 Quick Reference Guide ENWW

Print on both sides (duplex) with Windows

1. On the File menu in the software program, click Print.

2. Select the product, and then click the Properties or Preferences button.

3. Click the Finishing tab.

ENWW Print on both sides (duplex) with Windows 11

4. Select the Print on both sides (manually) check box. Click the OK button to print the first side of the job.

5. Retrieve the printed stack from the output bin, and maintaining the same orientation, place it with the printed-side facing down in the input tray.

6. On the control panel, press the OK button to print the second side of the job

12 Quick Reference Guide ENWW

To read more please download the PDFs below

Download Hp Laserjet Pro 200 Color Mfp M276nw Manual

hp laserjet pro 200 color mfp m276nw price
hp laserjet pro 200 color mfp m276nw toner
hp laserjet pro 200 color mfp m276nw (cf145a)
hp laserjet pro 200 color mfp m276nw scan to computer
hp laserjet pro 200 color mfp m276nw price in india
hp laserjet pro 200 color mfp m276nw specifications
hp laserjet pro 200 color mfp m276nw price philippines
hp laserjet pro 200 color mfp m276nw troubleshooting